Part No: AN703Issued year: 2011File size: 0.04mbFile type: pdf
ISOLUTE EPH SPE columns and associated methodologies have been optimised to efficiently fractionate EPHs into aliphatic and polycyclic aromatic (PAH) fractions. The principle is similar to the approach taken by the Massachusetts Department of Environmental Protection (MADEP) and TPH criteria working group (TPHCWG) methods. However, compared to these methods, the ISOLUTE EPH fractionation column has been significantly reduced in size and the sorbent has been optimised in order to reduce solvent volumes and provide an automation compatible fractionation column. Automation of the fractionation process has been achieved without carryover of PAHs into the aliphatic fraction.
Environmental contamination, ISOLUTE, PAH, Polyaromatic hydrocarbons, soil,
Part No: AN100Issued year: 2015File size: 0.16mbFile type: pdf
Biotage® Endeavor™ catalyst screening system was used to investigate the asymmetric hydrogenation of 4-aryl coumarins to 4-aryl-3,4-dihydrocoumarin, an important intermediate in the synthesis of endothelin receptor antagonists.
Part No: TN-0006.0506Issued year: 2006File size: 0.1mbFile type: pdf
The Atlantis pressure scale-up workstation performs and optimizes gas/liq and gas/liq/solid, heterogeneous reactions with the unique ability to monitor live gas consumption. Process
Chemists can easily load experiments with push-button hardware and precisely control and monitor reactions with simple-to-use software. The Atlantis system controls reaction parameters
automatically to eliminate sample degradation and in addition, provides concise reaction data reports with live molar uptake rates for better analysis.
Part No: AN793Issued year: 2013File size: 2.04mbFile type: pdf
This application note describes the extraction of a range of SPICE drugs and metabolites in urine which are
typically screened in forensic toxicology panels using ISOLUTE® SLE+ in a 96-well plate format. Both manual
(Biotage Pressure+ 96) and automated (TECAN Freedom EVO® 100) processing conditions are described.
Part No: Issued year: File size: 1.03mbFile type: pdf
• Solid-phase peptide synthesis (SPPS) is still often faced with challenges in the assembly of long and ‘difficult’ sequences, e.g. due to aggregation and steric hindrance giving rise to incomplete reactions. These problems have only partly been solved by new coupling reagents and solid supports.
• Precise microwave heating has emerged as one new parameter for SPPS, in addition to coupling
reagents, resins, solvents etc.
Part No: Issued year: File size: 0.13mbFile type: pdf
• Solid-phase peptide synthesis (SPPS) is still often
faced with challenges in the assembly of long and
‘difficult’ sequences, e.g. due to aggregation and
steric hindrance giving rise to incomplete reactions.
These problems have only partly been solved by
new coupling reagents and solid supports.
• Precise microwave heating has emerged as one
new parameter for SPPS, in addition to coupling
reagents, resins, solvents etc.
Part No: AN909.V.1Issued year: 2014File size: 1.37mbFile type: pdf
Cyclosporine is an immunosuppressant used in organ transplants to overcome rejection. Following the transplant of a heart, liver, kidney or lung, a patient must be regularly tested for the rest of their lives. Blood testing intervals vary from 1 month to 6 months and this rapid reference method is ideal for batch tests with the advantage of no metabolite interfer-ence which is always found in immunological methods.
Part No: AN908.V.1Issued year: 2014File size: 1.33mbFile type: pdf
The removal of interferences and sample concentration are
essential steps in trace level detection of pesticides, sheep
dips, herbicides and PCBs in river water, wastewaters and
trade effluents. The following methods were developed by
the Environment Agency National Laboratory Service facility
at Nottingham using the Biotage RapidTrace for automated
solid phase extraction and the TurboVap II for evaporation.
The procedures are UKAS accredited and can reach detection
limits of 0.001 ug/Litre for some compounds.
Part No: AN904.V1Issued year: 2014File size: 1.33mbFile type: pdf
EPA methods 8260 & 8270 cover the analysis of polychlorinated
dibenzo-p-dioxins and polychlorinated dibenzofurans
in ground & surface waters. This also now includes
1,4-dioxane and PCBs. This application note will focus on
the automated SPE of the sample rather than the detection
which usually involves GCMS or LCMS. NB The columns
and reagents used for soils and sediment analysis differ to
ground water extraction.
Part No: AN905Issued year: 2010File size: 0.25mbFile type: pdf
The extraction and segregation of Organic compounds from core samples taken from marine sediments is used to predict climate conditions, reconstruct sea temperatures and identify the type of vegetation from the C3 ( Temperate cli-mate) and C4 ( Tropical Climate) isotopic mass spectroscopy ratio analysis.
Part No: AN906.V.1Issued year: 2014File size: 1.29mbFile type: pdf
With the widespread clinical use of antidepressant drugs comes the need to accurately measure therapeutic lev-els to determine proper dosage, as well as check for toxic levels and patient compliance. More and more laboratories are shifting their therapeutic drug monitor-ing from liquid extraction to solid phase extraction. A large clinical laboratory has automated the process of extracting these drugs from serum using the RapidTrace SPE Workstation.
Part No: RP-DS-04Issued year: 2010File size: 0.19mbFile type: pdf
When analyzing human urine for drugs of abuse, one of the most common tests is for the cocaine metabolite Benzoylecgonine (BZE). A contract laboratory has automated this labor intensive procedure using the RapidTrace.
Part No: P101Issued year: 2014File size: 0.4mbFile type: pdf
Using the TLC to step gradient is simple and fast requiring only a minute or so to enter the data into the Isolera and create the method. The methods are scalable to larger cartridges increasing purification savings even more.
Part No: AN093.v2Issued year: 2014File size: 0.67mbFile type: pdf
We demonstrate the capability of the Biotage® Initiator+ Alstra™ microwave peptide synthesizer to fully automate the on-resin synthesis of cyclic peptides with examples showing disulfide bridge formation and side-chain to side-chain cyclization respectively.
This brochure presents the extensive range of instrumentation for flash purification from Biotage. To complement these products Biotage also offers a complete range of flash consumables, including columns in a variety of sizes packed with irregular and spherical silica, making Biotage your one-stop partner for your flash purification needs.
Keywords: Isolera™ Dalton, Isolera™ Spektra, 10 Isolera™ Spektra One and Four, Isolera™ Spektra LS (Large Scale), Isolera™ Prime, Isolera™ ELSD-1080, Biotage® Flash 75/150, Biotage® Flash 400
Part No: PPS377.V.1Issued year: 2016File size: 1.13mbFile type: pdf
Biotage® Metal Scavenging Toolkit is an essential tool that can enable you to quickly and efficiently find the right metal scavenger for your application. It contains protocols, guidance and recommendations for working in batch mode or passing solutions through a fixed bed, this all in one kit showcases the metal scavengers and provides practical information on how to use the metal scavengers in your application for the best results.
Part No: PPS381Issued year: 2015File size: 1.07mbFile type: pdf
The versatility of Biotage® V-10 enables evaporation of single samples (up to 12 mL) or large pooled volumes using V-10 pumps (syringe or peristaltic). Adding the automated vial loading/changing carousel enables unattended evaporation of up to 16 samples.
Part No: PPS304Issued year: 2012File size: 1.27mbFile type: pdf
Biotage ZIP Sphere delivers better purification and improved throughput than comparable flash cartridges. The silica surface area has been increased by 40%, meaning higher loading capacity, improved separations, and reduced purification time and solvent use.
Part No: 414127-AIssued year: 2014File size: 1.49mbFile type: pdf
Introduction to the Detector, Site Requirements and Specifications, Installing the Detector, Using the Detector, Optimizing Performance, Troubleshooting and Diagnostics, Error Information, Maintenance, and Parts and Materials for Maintenance.
Part No: 414158-FIssued year: 2016File size: 3.9mbFile type: pdf
The document is for systems with the Extrahera 1.4.0 software installed.
Contents: System Overview; Power Failure; Manage Solvents, Sample Types, Plates, Racks, and Pipette Tips; Set Up a Method; Run Single or Multiple Methods; Maintenance; Manual Control; Troubleshooting; Switch Between 24, 48, and 96 Format; General Information
Part No: UI332Issued year: 2015File size: 0.15mbFile type: pdf
During the preventive maintenance visit, the system is given a thorough strip down, service, reassembly and performance/function test to help ensure that it will remain in good working order for the following year.
Part No: 414159-BIssued year: 2014File size: 1.55mbFile type: pdf
Translated versions of the Safety chapter available in the Biotage® Extrahera™ Installation and Safety document (P/N 414157). Languages: Chinese, Danish, Dutch, Finnish, French, German, Greek, Italian, Japanese, Spanish, and Swedish.
Part No: 02140-AIssued year: 2014File size: 3.76mbFile type: pdf
INTRODUCING BIOTAGE® FLASH 150I, COMPONENTS OF BIOTAGE® FLASH 150I, INSTALLATION/GETTING STARTED, HOW TO USE BIOTAGE® FLASH 150I, TROUBLESHOOTING, PRICE LIST AND ORDERING INFORMATION, OPTIMIZING FLASH SEPARATIONS, FLASH CHROMATOGRAPHY WORKBOOK, and CE INFORMATON ADDENDUM.
Part No: 355977-GIssued year: 2015File size: 2.37mbFile type: pdf
Translated versions of the Safety chapter available in the Biotage® Initiator+ Installation and Safety document (P/N 355976). Languages: Danish, Dutch, Finnish, French, German, Italian, Japanese, Spanish, and Swedish.
Part No: 355977-FIssued year: 2014File size: 1.32mbFile type: pdf
Translated versions of the Safety chapter available in the Biotage® Initiator Installation and Safety document (P/N 355976). Languages: Danish, Dutch, Finnish, French, German, Italian, Japanese, Spanish, and Swedish.
Microwave irradiation is still the most effective solution for providing a fast, precise and efficient heating method for synthesizing peptides, peptoids, PNA and peptidomimetics with higher purity and yield compared to conventional synthesis methods. The Biotage® Initiator+ Alstra is a fully automated microwave peptide synthesizer with built in flexibility for both small and large scale synthesis.
Part No: PPS390.V.1Issued year: 2016File size: 1.05mbFile type: pdf
Biotage® MP-Borohydride is a macroporous, solid-supported borohydride that is a solid-supported equivalent of tetraalkylammonium borohydride. The bound borohydride is a versatile reducing agent used for the reduction of carbonyl
compounds and imines, and the reductive amination of aldehydes and ketones.
Part No: PPS392.V.2Issued year: 2016File size: 1.1mbFile type: pdf
Biotage® MP-Cyanoborohydride is a macroporous polymer-supported cyanoborohydride which is a solid-supported equivalent of tetraalkylammonium cyanoborohydride. The bound cyanoborohydride can be utilized as a versatile reducing agent for the reductive amination of carbonyl compounds and reduction of imines.
Part No: PPS391.V.1Issued year: 2016File size: 1.79mbFile type: pdf
Biotage® MP-Triacetoxyborohydryde is a macroporous polystyrene-supported equivalent of tetraalkylammonium triacetoxyborohydride. MP-Triacetoxyborohydride has primary applications in the reductive amination of aldehydes and ketones under neutral or mildly acidic reaction conditions.
Part No: PPS404.V.1Issued year: 2016File size: 1.41mbFile type: pdf
PS-Benzaldehyde is the resin-bound equivalent of benzaldehyde. This resin is useful for scavenging various nucleophiles, including primary amines (selectively compared with secondary amines), hydrazines and also carbon-based nucleophiles such as Meldrum’s acid and organometallics.
Part No: PPS402.V.1Issued year: 2016File size: 0.95mbFile type: pdf
PS-Carbodiimide is a neutral, bound carbodiimide that can be used for the synthesis of amides and esters. PS-Carbodiimide may also be used for the synthesis of pentafluorophenyl (PFP) activated esters (Table 3) and N-hydroxysuccinimidyl esters
Part No: PPS393.V.1Issued year: 2016File size: 0.98mbFile type: pdf
Biotage® PS-HOBt(HL) is a sulfonamide-linked, polymersupported
equivalent of 1-hydroxybenzotriazole (HOBt). PS-HOBt(HL) is used to generate bound HOBt active esters, which can either be made and used in situ, or isolated and stored as stable intermediates.
Part No: PPS400.V.1Issued year: 2016File size: 1.3mbFile type: pdf
Biotage®PS-Isocyanate is a 1% cross-linked poly(styreneco-divinylbenzene) which has pendent benzylisocyanate functionality. The resin can readily scavenge excess nucleophiles, which are often used to drive reactions to completion.
Part No: PPS401.V.1Issued year: 2016File size: 2.11mbFile type: pdf
PS-PPh3-Pd resin is a polystyrene-supported equivalent of the small molecule catalyst tetrakis(triphenylphosphine) palladium(0) [Pd(Ph3P)4]. The primary application for the resin is as a catalyst for Suzuki-Miyaura coupling reactions between arylboronic acids and aryl halides.
Part No: PPS382.V.1Issued year: 2016File size: 1.63mbFile type: pdf
Biotage® PS-TBD is a polymer-supported base, which applications are Alkylation of phenols and amines; esterification of carboxylic acids using alkyl halides; alkylation of activated methylene compounds; dehalogenation of organic halides; high throughput synthesis of aryl triflates and aryl nonaflates; Williamson ether synthesis
Part No: PPS389.V.1Issued year: 2016File size: 2.64mbFile type: pdf
Biotage® PS-Triphenylphosphine is a diphenylphosphinated polystyrene resin that is a solid-supported equivalent of triphenylphosphine. The resin can readily convert alcohols or carboxylic acids to the corresponding chlorides or acid chlorides in carbon tetrachloride.