Part No: AN303Issued year: 2007File size: 0.14mbFile type: pdf
Heck reactions utilizing a thermostable catalyst in combination with microwave irradiation have been performed. A substantial enhancement of reaction rates as well as excellent regiocontrol could be obtained under microwave conditions without using inert gas. A slight increase in yield was also noted.
Part No: CM-HMPB-0810Issued year: 2010File size: 0.29mbFile type: pdf
For peptides acid, we recommend using the HMPB-ChemMatrix
as this resin will provide high crude purity and a recovery yield of
90-95%. The Wang-ChemMatrix will produce similar crude
peptide purity, but the recovery yield is lower (60-70%). On
request, we can provide preloaded HMPB-ChemMatrix resins with
all 20 naturally occurring amino acids. Other amino acids can be
preloaded on special request.
Part No: AN747Issued year: 2011File size: 0.18mbFile type: pdf
Biotage® PRESSURE+ manifolds deliver positive pressure, parallel processing for 96 well plates and column formats. The systems utilize a consistent, uniform flow of positive pressure to move both low and high viscosity liquids through SPE plates and columns. ISOLUTE SLE+ Supported Liquid Extraction plates and columns offer an efficient alternative to traditional liquid-liquid extraction (LLE) for bioanalytical sample preparation, providing high analyte recoveries, no emulsion formation and greatly matrix effects associated with biofluid analysis.
SLE+, SLE, Supported Liquid Extraction, positive pressure manifold, Pressure+96, Pressure+48
Part No: UI333Issued year: 2015File size: 0.89mbFile type: pdf
If high back pressure is detected in the makeup pump lines, and/or the High Makeup Flow Pressure dialog appears, the microfilter may be partially clogged and needs replacing. This is a step by step guide.
Part No: UI319.v3Issued year: 2017File size: 0.7mbFile type: pdf
Biotage®SNAP Ultra cartridges are compatible with CombiFlash® Rf Systems. As a convenience, Biotage SNAP Ultra cartridges with Luer slip connectors are available. Contact your Biotage representative for ordering information.
Part No: AN078Issued year: 2013File size: 1.05mbFile type: pdf
In this application note we demonstrate the power of mass detection in Isolera™ Dalton by investigating the incomplete separation of two dyes, Butter yellow (Mass 225.29 g/mol) and Sudan red (Mass 278.31 g/mol), by normal phase flash purification.
Part No: P053Issued year: 2013File size: 1.22mbFile type: pdf
Immunosuppressant drugs are extremely important for therapeutic drug monitoring (TDM) regimes, requiring robust and reliable methods for their analysis. This poster aims to demonstrate strategies for the extraction of various immunosuppressant drugs from whole blood providing clean samples prior to UPLC-MS/MS analysis. Spiked whole blood was extracted using a variety of protocols to investigate optimal combination of drug recovery and extract cleanliness. UPLC-MS/MS was conducted using a Waters ACQUITY UPLC coupled to a Quattro Premier XE triple quadrupole mass spectrometer. Acceptable extraction recoveries were obtained showing excellent extract cleanliness, demonstrating a reliable method for mass spectrometric approaches for these analytes.
Immunosuppressants, SLE, Supported Liquid Extraction, ISOLUTE, MSACL, San Diego, 2013
Part No: P140Issued year: 2016File size: 0.31mbFile type: pdf
Reversed-phase chromatography is typically used when you need to separate several milligrams of relatively polar compounds that either are not soluble in normal-phase solvents or are not compatible with bare silica
because they react, stick, or both. If you are currently using reversed-phase at preparative scale, such as flash chromatography, you know the mobile phase limitations – water with either methanol, acetonitrile, or
THF. As with normal-phase flash chromatography, when it comes time to purify you want your crude sample fully solubilized in the weakest possible solvent at the highest possible concentration.
Part No: AN075.v2Issued year: 2013File size: 0.49mbFile type: pdf
In this application note we present a new type of polymeric reverse phase adsorbent that is able to provide improved separations of a range of small chemical compounds and also peptides evaluated side by side to a comparable benchmark DVB-Styrene macroporous resin.
MIP, molecularly imprint resins
Part No: AN063Issued year: 2012File size: 0.48mbFile type: pdf
Pyrazines are a class of organic molecules often used to provide flavor to foods. They are typically synthesized but some are found in fruits and vegetables, e.g. grapes, bell peppers, peas, asparagus, beetroot, tobacco, and roasted foods. Pyrazine’s heterocyclic chemistry can yield some challenges to their purification due to the various separation kinetics between the compound and silica. Biotage SNAP Ultra.
Part No: P160Issued year: 2017File size: 0.24mbFile type: pdf
Although capable of very high resolution, RP-HPLC is often limited by low column loading capacity, therefore demanding a significant time investment for peptide purification. As an alternative strategy, reversed-phase flash chromatography can also be used to purify synthetic peptides. The larger particle size used in flash column chromatography enables much larger loading capacity, thereby significantly reducing the time required for peptide purification.
Part No: PPS375.v1Issued year: 2015File size: 0.3mbFile type: pdf
User report: Flash instruments. Chugai Pharmaceutical uses Biotage flash chromatography products for drug discovery research. When deciding to convert from manual open-column procedures to automated systems, they chose successive generations of Biotage products, ranging from the Flash+® packed column to the Biotage® Horizon, SP1, Isolera™ Spektra, and Isolera™ Dalton automated flash chromatography systems.
Part No: AN041Issued year: 2001File size: 0.16mbFile type: pdf
Normal-phase flash purification is commonly used by organic chemists in pharmaceutical drug discovery and
process development labs. However, for many synthesized products (e.g. peptides, nucleotides and basic
drug candidates) purification on standard flash silica is not an option due to irreversible adsorption, chemical
interaction and/or solubility issues. Reversed-phase flash purification is an excellent solution for these applications. Yet, this technique has been used sparingly because of perceived lower loading capacity, higher
operating pressures and a scarcity of publications addressing reversed-phase flash chromatography.
Part No: AN039Issued year: 2002File size: 0.64mbFile type: pdf
For pilot and production scale purification drugs, the use of a large particle-size media is common. Improving the purification throughput is limited by the media’s large particle size. Such a case was recently encountered when a pharmaceutical company attempted to improve the efficiency of a large-scale purification. In their current process, the use of a 350-600 µm polystyrene-type resin resulted in a lengthy purification cycle and low separation efficiency. However, the labile properties of the targeted component required a shorter purification cycle and high purification.
Part No: TN128Issued year: 2006File size: 0.09mbFile type: pdf
This technical note describes the use of derivatization techniques to separate aliphatic
secondary amines from aliphatic tertiary amines in a mixture using the strong cation
exchange sorbent, ISOLUTE® SCX-2.