Part No: PPS321Issued year: 2013File size: 2.79mbFile type: pdf
Be sure you have your target compound the moment your purification is complete. The Isolera™
Dalton integrates the Biotage approach to flash chromatography with true compound identification
using mass detection.
Part No: AN079Issued year: 2014File size: 0.89mbFile type: pdf
Traditional RP-HPLC techniques not always critical because improvements in solid-phase peptide synthesis techniques over the years (microwave heating and ChemMatrix® solid phase supports) have reduced the burden on downstream purification steps. Mass directed flash purification can be a viable alternative to more expensive (and lower capacity) semi- or prep-scale RP-HPLC methods.
Part No: UI349Issued year: 2017File size: 0.61mbFile type: pdf
The tasks carried out during the maintenance visit shall include
servicing the listed components and a final check which is
based on factory acceptance and qualifications tests. These
two procedures constitute a Biotage Preventive Maintenance
Isolera Dalton identifies compounds by mass in real time during flash separation, leading to greater confidence in purification, higher purity, greater recovery, and a significant saving in time. Reduce or eliminate the need for time consuming off-line mass analysis during development programs, increase throughput and effectiveness for both chemists and analytical groups.
The Isolera ELSD (evaporative light-scattering detector) is a universal detector designed for use with Isolera flash purification systems when purifying organic compounds that
are undetectable UV or visible light. Flash chromatography with detection and fractionation is now possible when purifying carbohydrates, steroids, lipids, terpenes and other UVtransparent compounds.
Part No: TN/UG-0028.0509Issued year: 2009File size: 0.39mbFile type: pdf
The Isolera leak detection system is designed with safety in
mind. Unlike vapor sensing devices with unreliable solvent
vapor sensitivity, the Isolera leak detector’s sensitive,
solvent-resistant refractive index (RI) monitor rapidly
signals the Isolera flash system to stop pumping if any
liquid, volatile or non-volatile, is detected thus protecting
the chemist, system, and lab from potential hazards.
Part No: TN-0024.0210 (2)Issued year: 2010File size: 0.61mbFile type: pdf
TheBiotage Isolera™LS development-scale flash purification
systemdramatically shortens large-scale purification run-times
with flow rates of 50-500mL/minute. Simply select or create a
method, load your sample, and run – it’s that easy. New
advanced features include: solvent-savingGradientOptimization
(GO), the ability to collect fractions on two separatewavelengths,
use of up to four solvents in a single gradient and add a third
With the Biotage Isolera Spektra, new, intelligent, time-saving features such as gradient optimization, λ-All peak detection, and real-time photodiode array (PDA) scanning enable chemists to purify more compounds in less time and reduce post-process purity analysis.
Part No: PPS314Issued year: 2013File size: 0.46mbFile type: pdf
A new Biotage innovation allows organic chemists to deliver high purity
compounds in the minimum amount of time using minimum amounts of solvent.
Chemists simply enter TLC data and follow the Isolera™ Spektra software’s
method recommendations, based on knowledge gained over 20 years of
experience in automated flash chromatography leadership.
Part No: PN413Issued year: 2003File size: 0.03mbFile type: pdf
Traditional liquid-liquid extraction, carried out in vials, can be difficult to automate. ISOLUTE Array
HM-N plates for supported liquid extraction offer an easy to automate alternative to this popular sample
preparation technique, eliminating the need to physically separate immiscible layers. Each step is a
simple liquid transfer or addition, and no mixing is required.
Part No: Issued year: 2008File size: 0.07mbFile type: pdf
This method selection guide is designed to minimize the choices required to optimize the Supported Liquid Extraction method. The buffer and solvent suggestions provide a range of pHs and solvent polarities for acidic, neutral and basic drugs of varying pKa and logP values. The selections are based on extensive work in Biotage’s R&D Laboratories.