Part No: PPS377.V.1Issued year: 2016File size: 1.13mbFile type: pdf
Biotage® Metal Scavenging Toolkit is an essential tool that can enable you to quickly and efficiently find the right metal scavenger for your application. It contains protocols, guidance and recommendations for working in batch mode or passing solutions through a fixed bed, this all in one kit showcases the metal scavengers and provides practical information on how to use the metal scavengers in your application for the best results.
Part No: PPS458Issued year: 2017File size: 1.04mbFile type: pdf
On Aug 30, 2017 a scientific literature search for the keywords Biotage AND peptide
was performed by Biotage personnel. The search identified 5380 peer-reviewed
publications from the global community, excluding patents and simple citations.
Below are approximately 100 titles illustrating the breadth and depth of research in
which Biotage tools are utilized.
Part No: PPS381Issued year: 2015File size: 1.07mbFile type: pdf
The versatility of Biotage® V-10 enables evaporation of single samples (up to 12 mL) or large pooled volumes using V-10 pumps (syringe or peristaltic). Adding the automated vial loading/changing carousel enables unattended evaporation of up to 16 samples.
Part No: Issued year: 2020File size: 108.97mbFile type: exe
Biotage® V-10 Touch Control Centre can be used to control any V-10 Touch system. The software is installed on an external computer and adds the capabilities of integrating the V-10 Touch system with a liquid handler as well as running the carousel with different methods for different carousel positions.
Part No: PPS534.V.1Issued year: 2017File size: 0.97mbFile type: pdf
The SPE-Z Prep manifold is a low-cost solution for disk solid phase extraction (SPE). The SPE-Z Prep manifold simultaneously processes up to 3 samples with easy-to-use rugged hardware. The multipurpose funnel (shown in Figure 1) allows easy sample loading with a variety of sample bottles and disk holder combinations on a single system. The SPE-Z Prep manifold allows the use of SPE disks instead of liquid-liquid extraction, increasing efficiency, especially since the possibility of an emulsion forming is greatly reduced.
Part No: 414127-AIssued year: 2014File size: 1.49mbFile type: pdf
Introduction to the Detector, Site Requirements and Specifications, Installing the Detector, Using the Detector, Optimizing Performance, Troubleshooting and Diagnostics, Error Information, Maintenance, and Parts and Materials for Maintenance.
Part No: 414159-FIssued year: 2020File size: 1.77mbFile type: pdf
Translated versions of the Safety chapter available in the Biotage® Extrahera™ Installation and Safety document (P/N 414157). Languages: Chinese, Danish, Dutch, Finnish, French, German, Greek, Italian, Japanese, Portuguese, Spanish, and Swedish.
Part No: PPS530Issued year: 2019File size: 0.24mbFile type: pdf
Oil and Grease is an important general measurement that can be used to indicate water quality and help ensure consistent wastewater treatment plant operation.
Automated solid phase extraction can help to make the process more reproducible and easier to fit into the laboratory workflow. The SPE-DEX 3100 offers reliable operation, even with highly particulated samples.
Part No: PPS541Issued year: 2019File size: 0.56mbFile type: pdf
Oil and grease (n-hexane extractable
material) is a general indicator of the
amount of hydrocarbons in a water
supply. The Biotage Horizon 3100 automates the entire extraction
process, fully compliant with US EPA Method
1664A/B, ISO 11349 and Standard Methods 5520B.
Part No: PPS540Issued year: 2019File size: 0.68mbFile type: pdf
The SmartPrep II Cartridge System is
designed for simple automation of
manual solid phase extraction (SPE)
methods. Just like manual SPE, up to
12 samples per SmartPrep II System
can be run in one batch.
Part No: PPS520Issued year: 2014File size: 0.52mbFile type: pdf
Automating Solid Phase Extraction (SPE) can be simple and efficient with the SmartPrep Extractor. Designed for laboratories transitioning from manual to automated SPE, the SmartPrep Extractor focuses on the essential SPE process to run a variety of sample matrices and volumes without dedicated experts.
Part No: PPS519Issued year: 2014File size: 0.43mbFile type: pdf
Solid phase extraction (SPE) of transformer oils, biofuels, edible, and essential oils can offer challenges of working with difficult matrices, multiple methods, and hazardous solvents.
The SmartPrep Oil & Fuel Extractor systems are complete with racks, sample tubes, and accessories packaged to automate the typical manual SPE oil and fuel procedures, removing the challenges of working with oils and fuels, while providing a consistent and simple approach to running multiple methods on the same platform.
Part No: PPS521Issued year: 2014File size: 2.85mbFile type: pdf
Solid Phase Extraction (SPE) is one of the most common sample preparation techniques that can be automated with simplicity. The SmartPrep Extractor Software offers an easy and intuitive interface specifically designed to streamline the manual SPE process for 1, 3, and 6-mL cartridges. No specialized training or expertise is needed to run samples. Any technician level from novice to expert can quickly get started with SPE sample processing.
Part No: PPS516Issued year: 2019File size: 0.12mbFile type: pdf
The Biotage® Horizon SPE-Z Prep Manifold (PN SPZ-0250) is
designed for high productivity disk solid phase extraction (SPE)
work. The manifold will allow you to use high-quality Pacific
O&G and Atlantic solid phase extraction (SPE) disks from
Horizon Technology in an easy-to-use three-position unit. The
system offers the flexibility to choose optimal size disks (47 or
100 mm) and pre-filters to process a wide range of water sample
Part No: 355977-FIssued year: 2014File size: 1.32mbFile type: pdf
Translated versions of the Safety chapter available in the Biotage® Initiator Installation and Safety document (P/N 355976). Languages: Danish, Dutch, Finnish, French, German, Italian, Japanese, Spanish, and Swedish.
Part No: 355977-HIssued year: 2017File size: 2.38mbFile type: pdf
Translated versions of the Safety chapter available in the Biotage® Initiator+ Installation and Safety document (P/N 355976). Languages: Danish, Dutch, Finnish, French, German, Italian, Japanese, Spanish, and Swedish.
Microwave irradiation is still the most effective solution for providing a fast, precise and efficient heating method for synthesizing peptides, peptoids, PNA and peptidomimetics with higher purity and yield compared to conventional synthesis methods. The Biotage® Initiator+ Alstra is a fully automated microwave peptide synthesizer with built in flexibility for both small and large scale synthesis.
Part No: PPS320.v.1Issued year: 2014File size: 0.98mbFile type: pdf
Biotage® Initiator+ Alstra™ is a fully automated, single channel, programmable microwave peptide
synthesizer for Fmoc-solid phase peptide synthesis. This instrument now comes with the Alstra 1.1
software upgrade that introduces new functionality such as Branches, Preactivation and “Edit on
the fly”, and options for UV monitoring and MAOS (organic synthesis) capability.
Part No: PPS390.V.1Issued year: 2016File size: 1.05mbFile type: pdf
Biotage® MP-Borohydride is a macroporous, solid-supported borohydride that is a solid-supported equivalent of tetraalkylammonium borohydride. The bound borohydride is a versatile reducing agent used for the reduction of carbonyl
compounds and imines, and the reductive amination of aldehydes and ketones.
Part No: PPS392.V.2Issued year: 2016File size: 1.1mbFile type: pdf
Biotage® MP-Cyanoborohydride is a macroporous polymer-supported cyanoborohydride which is a solid-supported equivalent of tetraalkylammonium cyanoborohydride. The bound cyanoborohydride can be utilized as a versatile reducing agent for the reductive amination of carbonyl compounds and reduction of imines.
Part No: PPS391.V.1Issued year: 2016File size: 1.79mbFile type: pdf
Biotage® MP-Triacetoxyborohydryde is a macroporous polystyrene-supported equivalent of tetraalkylammonium triacetoxyborohydride. MP-Triacetoxyborohydride has primary applications in the reductive amination of aldehydes and ketones under neutral or mildly acidic reaction conditions.
Part No: PPS404.V.1Issued year: 2016File size: 1.41mbFile type: pdf
PS-Benzaldehyde is the resin-bound equivalent of benzaldehyde. This resin is useful for scavenging various nucleophiles, including primary amines (selectively compared with secondary amines), hydrazines and also carbon-based nucleophiles such as Meldrum’s acid and organometallics.
Part No: PPS402.V.1Issued year: 2016File size: 0.95mbFile type: pdf
PS-Carbodiimide is a neutral, bound carbodiimide that can be used for the synthesis of amides and esters. PS-Carbodiimide may also be used for the synthesis of pentafluorophenyl (PFP) activated esters (Table 3) and N-hydroxysuccinimidyl esters
Part No: PPS393.V.1Issued year: 2016File size: 0.98mbFile type: pdf
Biotage® PS-HOBt(HL) is a sulfonamide-linked, polymersupported
equivalent of 1-hydroxybenzotriazole (HOBt). PS-HOBt(HL) is used to generate bound HOBt active esters, which can either be made and used in situ, or isolated and stored as stable intermediates.
Part No: PPS400.V.1Issued year: 2016File size: 1.3mbFile type: pdf
Biotage®PS-Isocyanate is a 1% cross-linked poly(styreneco-divinylbenzene) which has pendent benzylisocyanate functionality. The resin can readily scavenge excess nucleophiles, which are often used to drive reactions to completion.