Part No: AN110-HORIssued year: 2016File size: 2.15mbFile type: pdf
This work demonstrates the performance of automated solid phase extraction (SPE) for the extraction of PAHs from surface water sampled from a nearby pond containing some particulate. An automated system (Biotage® Horizon 4790) with Atlantic® DVB disks, following the requirements of method EN 16691, was used.
Part No: AN109-HORIssued year: 2016File size: 1.5mbFile type: pdf
This application note describes the automated solid phase extraction (SPE) and GC/MS analysis of whole water samples according to EN16691 for PAHs.
Method EN 16691 is a recently developed method that uses solid phase extraction to isolate organic compounds from 1 L of water using a divinylbenzene (DVB) solid phase extraction disk.
Part No: AN009-HOR.V.1Issued year: 2015File size: 0.58mbFile type: pdf
Method 525.2 describes the procedure to determine a full suite of low concentration semi-volatile organic compounds in drinking water using solid phase extraction (SPE) or liquid–solid extraction (LSE) techniques. The City of Fort Worth, Water Department implemented an automated SPE process for the analysis of semi-volatiles by EPA Method 525.2 using the Atlantic® C18 solid phase extraction disk. Ethyl acetate, methanol and water were used to condition the Atlantic C18 disk prior to the extraction step. The extraction solvents used were a 1:1 mixture of methylene chloride and ethyl acetate. Extracts were then analyzed by GC/MS using a splitless injection technique.
Part No: AN119-HORIssued year: 2010File size: 1.39mbFile type: pdf
US EPA method 550.1 is a method used by regulatory agencies to determine PAH’s in drinking water by liquid-solid extraction (LSE) and high performance liquid chromatography (HPLC).1 The method outlines the steps needed to perform extractions of PAHs from drinking water sources and finished drinking water; as well as the quality control (QC) program requirements to ensure the method is operated under control.
Use of Biotage automated sample preparation products allows users to achieve the precise and consistent data needed to comply with EPA method 550.1 QC specifications as stated in method, section 10.3.2., for Initial Demonstration of Capability (IDC); while at the same time, streamlining laboratory practices to increase lab productivity.