Biotage® Sfär Silica HC is the obvious choice when you need to run the best possible separation with the smallest amount of silica and solvent or when you need to increase dramatically your loading capacity. Biotage® Sfär Silica HC - High Capacity 20 μm provides maximum resolving power and enables sample loads double (or more) that of other columns. Suitable for more complex separations, or when you have high requirements in terms of high resolution, high purity or quantity of the final compound.
Biotage® Sfär Silica HC D is the obvious choice when you need to run the best possible separation with the smallest amount of silica and solvent and, at the same time, have the flexibility to load your sample in six different ways. Biotage Sfär Silica HC D- High Capacity Duo 20 μm provides maximum resolving power and has sample load methods twice (or more) that of other columns. It’s suitable for more complex separations, or when you have high requirements in terms of high resolution, high purity or quantity of the final compound and flexibility in the way you load your sample.
Load samples onto the column more effectively than with traditional liquid loading. Designed exclusively to complement the SNAP cartridge format, Samplets allow you to boost flash purification performance without changing your purification strategy.
This product was withdrawn on October 1st, 2019. Please check out here the corresponding column in the Biotage® Sfär family: C18 media: Biotage® Sfär Bio C18 Duo 300 Å 20 μm or C4 media: Biotage® Sfär Bio C4 Duo 300 Å 20 μm The purification step (RP-HPLC) is one of the main bottlenecks in the peptide synthesis workflow, limited by small loading amounts, long separation times, poor recoveries and high costs. Biotage® Sfär Bio cartridges offer similar performance, in a flash format, at a fraction of the cost. They have an increased loading capability compared to prep RP-HPLC, enabling more peptide to be processed in a single injection and faster, more efficient peptide purification. Biotage® Sfär Bio flash cartridges are a powerful tool to address the purification needs of peptide chemists.
This product will be phased out on October 1st, 2019 (except 950g, 1850g). Please check out here the corresponding column in the Biotage® Sfär family: Biotage® Sfär C18 Duo 100 Å 30 μm Reversed-phase flash chromatography is a very effective purification technique. Its main application areas include polar, ionizable and highly lipophilic compounds which cannot easily be separated by normal-phase techniques.
This product will be phased out on October 1st, 2019 (except 900g size). Please check out here the corresponding column in the Biotage® Sfär family: Biotage® Sfär Amino Duo Biotage® KP-NH chemistry shields synthetic organic amines from acidic silanols providing improved selectivity, peak shape, purity and yield. Unlike traditional silica and 1° amine (propyl amine) bonded silica, Biotage KP-NH doesn’t require the use of chlorinated solvents or amine additives.
The following sizes of these columns have been phased out on October 1st, 2019: 10g, 25g, 50g, 100g,340g The following formats remain available: 750g, 1500g . Please check out here the corresponding column in the Biotage® Sfär family: Biotage® Sfär Silica Duo
This product has been phased out on October 1st, 2019. Please check out here the corresponding column in the Biotage® Sfär family: Biotage® Sfär High Capacity Duo Biotage SNAP Ultra flash chromatography cartridges deliver the highest purification performance available. Packed with Biotage® HP-Sphere™ spherical silica, these cartridges have the highest loading capacity, lowest backpressure and can withstand high flow rates.
This product will be phased out on October 1st, 2019 (except 950g, 1850g). Please check out here the corresponding column in the Biotage® Sfär family: Biotage® Sfär C18 Duo 100 Å 30 μm The latest, highest performing reversed phase C18 spherical silica flash cartridges available.
The Solvent Recovery OG System is used for the efficient automation of oil and grease extraction and attaches quickly and easily to the SpeedVap® Solvent Evaporation System.
The Biotage® Solvent Recovery SVOC is designed to condense and collect solvent vapors which are generated when using the DryVap® concentration system.
Designed for high throughput laboratories, the Biotage® SPE Dry 96 and Biotage® SPE Dry 96 Dual Sample Concentrator Systems provide efficient solvent evaporation in microplate format and are compatible with 24-, 96- and 384-well collection plates. Heated gas flow from above and below the collection plate ensures efficient solvent evaporation.
Biotage® V-10 Touch rapidly dries samples dissolved in both aqueous and organic solvents. It easily evaporates HPLC fractions from purification, high boiling point solvents from synthesis and features a novel dry-down onto silica technique for easier dry load capabilities prior to purification.
Biotage® VacMaster™ Sample Processing Manifolds allow up to 10 (VacMaster-10) or 20 (VacMaster-20) SPE or filtration columns to be processed simultaneously under vacuum. Unused ports are sealed when not required. Easy to use vacuum controls provide excellent sample flow control, leading to reproducible, reliable extraction conditions.
Biotage® VacMaster™-96 sample processing manifold has been designed with the needs of the bioanalytical scientist in mind. This manifold is ideal when processing 96-well SPE, supported liquid extraction or protein precipitation plates either manually or with an automated liquid handling system.
The Biotage® VacMaster™ Disk is a solid phase extraction system for performing manual, disk-based extractions. The system is designed for high productivity laboratories and is an excellent first step for laboratories interested in moving from liquid-liquid extractions to solid phase extractions for sample preparation.