Biotage® Extrahera™ LV-200
Automated sample preparation workstation
Automates low-volume sample prep with precision, GLP compliance, and intuitive software in a compact footprint.
Explore the main benefits of Biotage® Extrahera™ LV-200
Precision pipetting for low volumes
Biotage® Extrahera™ LV-200 is engineered for small-volume workflows, delivering accurate parallel transfers with its 8-channel pipetting head. It supports 96-well plates and is compatible with tips from 50 to 1000 µL, enabling reliable performance across SPE, SLE, PPT, and PLD workflows.
Intuitive automation with GLP compliance
The integrated touchscreen interface simplifies method setup for all users. Optional GLP software adds audit trails and user access control, supporting compliance in regulated environments.
Positive pressure for reliable results
Biotage® Extrahera™ LV-200 uses a pressure-driven system to deliver consistent flow rates, even with challenging sample viscosities. This ensures high analyte recoveries and reproducible results across a wide range of sample types.
Specifications
-
Solvent capacity
5 auto + 5 manual reservoirs
-
Dimensions
860 × 570 × 790 mm (33.8” x 22.4” x 31.1”) with touchscreen
-
Weight
80 kg (176 lbs.)
-
Interfaces
Touchscreen, USB 2.0, Ethernet
-
Pipette pump capacity
5-800 μL
-
Pipetting specifications
Up for the 50 μL pipette tip (P/N 417008):
At 5 μL: ±5.0% accuracy and 5.0% CV
At 10 μL: ±5.0% accuracy and 5.0% CV
At 25 μL: ±4.0% accuracy and 2.5% CV
At 50 μL: ±2.5% accuracy and 2.0% CVFor the 200 μL pipette tip (P/N 417009):
At 20 μL: ±5.0% accuracy and 5.0% CV
At 100 μL: ±2.0% accuracy and 1.5% CV
At 200 μL: ±1.5% accuracy and 1.0% CV -
Pressure unit
Positive pressure unit:
Processing: 0-5 Bar (0.1 Bar Increments)
Plate dry: 5 Bar at 600 mL/min -
Format
96-well extraction plates:
96-array plates for 1 and 2 mL wells
96-position extraction racks for 1 mL (tabless) columns (A format)
96-position tip racks for 200 μL, and 300 μL,DFE column tips
-
Plate positions
6 position upper deck used for sample, extraction plates, pipette tips and solvents.
4 positions on lower deck carousel for multiple elution and waste.
-
Disposable tips
Disposable sample tips (Position 2): 50 uL, 200 uL, 1000 uL and 1000 uL clear wide bore tips.
Disposable solvent tips (Position 1): 50 uL, 200 uL, 1000 uL clear tips.
Disposable aolvent tips (Position 6): 50 uL, and 200 uL clear tips only.
-
Temperature
Operating temperature: 18°C to 32°C.
Storage and transportation temperature: -25 °C to 60 °C
-
Humidity
10 to 90% RH -
Power supply
100 to 240 V, 50/60 Hz -
Fuses
T4A at the power inlet (2 required) -
Maximum power consumed
300VA -
Pressurized air supply
>5 L/min (0.18 cubic feet/min), 6 ± 0.2 bar (0.6 ± 0.02 MPa; 87 ± 3 psi) -
Inert gas supply
AIR port requirements: >5 L/min (0.18 cubic feet/min), 6 ± 0.2 bar (0.6 ± 0.02 MPa; 87 ± 3 psi).
N2 port requirements: 1 L/min (0.04 cubic feet/min) during processing and 70 L/min (2.5 cubic feet/min) during plate dry, 6 ± 0.2 bar (0.6 ± 0.02 MPa, 87 ± 3 psi)
-
Vacuum supply
Partial pressure range: < 500 mbar (50 kPa; 7 psi)
Flow rate: ≥ 8.3 L/min (0.29 cubic feet/min)
-
Max sound level
65 dB(A) -
GLP
GLP software ready -
Certifications
CE, CSA certified
Resources
-
Read article
Application note
Extraction of catecholamines and metanephrines from human plasma Biotage® Extrahera™ LV-200 and low volume SPE prior to UHPLC-MS/MS analysis
-
Read article
Application note
Automated extraction of catecholamines and metanephrines from human plasma using Biotage® Extrahera™ LV-200 and microelution SPE prior to UHPLC-MS/MS analysis
-
Read article
Application note
Automated extraction of a drugs of abuse panel from human urine using Biotage® Extrahera™ LV-200 and microelution SPE
Ordering information
Related products
TurboVap® 96 Dual | Plate evaporator with intelligent heating
Dual-plate evaporation with intelligent heating and flow control for high-throughput workflows.
Biotage® Mikro SPE | Solid-phase extraction microelution plate
Excellent sample clean-up, delivering reproducible and high-sensitivity analytical results.
ISOLUTE® SLE+ | Supported liquid extraction plates and cartridges
Load-wait-elute procedure for stress free extraction of analytes from biological fluids, providing high analyte recoveries and clean extracts.
ISOLUTE® PLD+ | Protein and phospholipid removal plates and cartridges
Effortlessly enhance analyte sensitivity with effective but extremely simple sample clean-up for LC-MS/MS analysis.