Non-Polar SPE

All the SPE phases on this page extract analytes from aqueous samples using a non-polar (hydrophobic) retention mechanism. The most retentive phases are listed first.

Extract polar analytes (with low hydrophobic character) using the most retentive phases
Consider less retentive phases for extraction of non-polar (more hydrophobic) analytes

Highly retentive phase, extracts very polar analytes which are not retained by silica based C18 media.

ISOLUTE® ENV+

Retains a broad range of polar and non-polar analytes. No secondary interactions. Used for PFAS in method EPA537.

ISOLUTE® 101

Retains a broad range of polar and non-polar analytes. Secondary silanol interactions may enhance recovery of basic analytes.

ISOLUTE® C18

Retains a broad range of polar and non-polar analytes. Efficiently end-capped to minimize secondary silanol interactions.

ISOLUTE® C18(EC)

Retentive phase with high secondary silanol interactions for enhanced retention of basic compounds. Use in pH range 2-8.

ISOLUTE® MFC18

Medium retentive phase for polar and non-polar analytes. Secondary silanol interactions may enhance recovery of basic compounds.

ISOLUTE® C8

Medium retentive phase for non-polar analytes. Efficiently end-capped to minimize secondary silanol interactions.

ISOLUTE® C8(EC)

Medium retentive phase for extraction of polar and non-polar analytes. Secondary silanol interactions may enhance recovery of basic compounds. Different selectivity compared to C8 media.

ISOLUTE® PH

Less retentive phase for extraction of non-polar analytes. Secondary silanol interactions may enhance recovery of basic compounds.

ISOLUTE® C4

Non-Polar SPE

About Biotage

Ask a specialist